Aircrack-ng suit on raspberry pi

Aircrack-ng suit on raspberry pi

Aircrack-ng suit on raspberry pi


In this Article we will learn how to install Aircrack-ng suit on raspberry pi.

Let’s Follow me:

Steps 1: Update the system.
sudo apt-get update && sudo apt-get upgrade

Steps 2: Upgrade firmware.
sudo rpi-update

Steps 3: Install dependencies.
sudo apt-get install libssl-dev and sudo apt-get install libnl-dev and sudo apt-get install sqlite

Steps 4: Download aircrack-ng suit. Always check the aircrack-ng website for the latest release.
wget http://download.aircrack-ng.org/aircrack-ng-1.2-rc4.tar.gz

Steps 5: Extract the suit.
tar -xvf aircrack-ng-1.2-rc4.tar.gz
cd aircrack-ng-1.2-rc4/

Steps 5: Install the aircrack-ng suit
sudo make
sudo make install

Steps 6: installation verifcation.
pi@raspberrypi:~/aircrack-ng-1.2-rc4 $ sudo airmon-ng

PHY Interface Driver Chipset

phy0 wlan0 brcmfmac Broadcom 43430

pi@raspberrypi:~/aircrack-ng-1.2-rc4 $

You will get output like above.

Bookmark the permalink.

3 Comments

  1. Reloaded my pi with the Raspbian software. Then tried this but it fails at the sudo make command every time.

  2. Steps 5: Install the aircrack-ng suit
    sudo make
    sudo make install

    pi@raspberrypi:~/Downloads $ cd aircrack-ng-1.2-rc5/
    pi@raspberrypi:~/Downloads/aircrack-ng-1.2-rc5 $ sudo make
    make: *** No targets specified and no makefile found. Stop.
    pi@raspberrypi:~/Downloads/aircrack-ng-1.2-rc5 $ sudo make install
    make: *** No rule to make target ‘install’. Stop.

Leave a Reply

Your email address will not be published. Required fields are marked *